Object size

General questions about the printer and printer software.

Object size

Postby Braiderbob » Wed Jul 01, 2015 5:20 pm

What is the size in inches of the largest object the printer can print? I have a piece that is a cylinder 1.25" in diameter and 1.5 inches tall
Braiderbob
 
Posts: 1
Joined: Wed Jul 01, 2015 5:17 pm

Re: Object size

Postby ron.kundla » Sat Jul 04, 2015 1:50 pm

The working size is 40x20mm X/Y, which translates to about 1.5" by 3/4".

The tallest item I have printed is at 47mm (the DS2 marker) which is about 1.85" and I think that is about as high as you can go without the platform detaching itself when it goes to the extraction position.
Super Early Beta Adopter
"I don't work for iBox, but I did stay at a Holiday Inn Express" ;)
ron.kundla
iBox Pro User
 
Posts: 164
Joined: Sun Jun 14, 2015 1:39 pm

Re: Object size

Postby iboxsupport » Mon Jul 06, 2015 6:43 pm

The Nano has a working area of 40mm x 20mm x 90mm.

We have printed the full 90mm, however it takes quite a while to print something that large.
iboxsupport
Site Admin
 
Posts: 53
Joined: Mon Feb 16, 2015 2:16 pm


Return to General

Who is online

Users browsing this forum: No registered users and 1 guest

cron